AC Motor Automatic Sliding Gate Operator 1500KGS Sliding Door Motor
Thank you very much for paying your attention to our sliding gate opener
This is the newest of our gate openers, with an all new design, clutch structure,
shape and control system. The integration of the mechanical and electrical components
provides hassle free installation and operation of a single unit, rather
than multiple systems. The unique route control eliminates the route switch installation
headaches and the unsteadiness of comparable products. The individuation
of the clutch structure improves safety and reliability, and the unique clipper-built
shape makes for a stylish and elegant product.
1. Functions
1). Integrated structure of mechanic and electric. No need to install other controllers.
2). Electronic soft-start
3). Automatically restraining when meeting obstacle
4). Crash proof and automatically restraining socket
5). Crash proof (photocell)
6). Alarm light socket
7). Line control and Remote control is optional
8) Automatically increase the temperature when the temperature is below 0 degree.
2. Motor Data
Model: MX-001
Voltage: 220V±10%, 110V±10%
Frequency: 50/60Hz
Motor voltage: AC 220V/110V, DC 24V
Capacitor: (220V) 16μF/450V, (110V) 60μF/250V
Power: 300W
Torque: 40nm
Motor speed: (220V) 1300±50n/m, (110V) 1430±50n/m
Gear speed: 48rpm
Travel speed: 13.4m/min
Working temperature: -40~75
Motor making technique: die casting aluminum alloy
Manual Release: yes
Product weight, approx: 15kg
Max, weight of gate: 1800kg
3. Electronic Data
Model: MX-002
Soft start: YES
Stop on obstacle (sensitivity adjustable): YES
Auto warming-up (at freezing temperature): NO
Remote control: 418MHz (50m, approx)
Wire control: Available
Auto closing: NO
Vehicle loop detector socket: YES
Photocell socket: YES
Alarm light socket: YES
Automatic sliding door motor FAQ:
1 The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.
2 The power indicator light doesn't flash and the key doesn't
react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.
3 The opening and closing limit can not work.
A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the
position of the limit iron.
4 Crash proof is not effective.
A: Check whether the connection of crash proof is correct.
B: Check whether the photocell is installed right.
C: Check whether the connection of the wire of the loop
detector is right .
5 When the gate just close up, it turns to open.
A: Check whether the voltage is normal.
B: If the crash proof equipment is installed, please check
whether it works well.
6 The remote control doesn't work
A: Check whether the battery is low. If yes, change it.
B: Check whether the code of the remote control is the same
with the code of the control panel.
Product Tags:
|
|
AC Motor Automatic Slide Gate Operators 1500KGS Sliding Door Motor Images
|
